Jump to content

Recommended Posts

Posted

Hi,

 

In the process of converting a car port into an annex. Have attached a pic, but if i'm looking to install a window based on the image attached, how do I determine which lintel to use, it's single storey, window width roughly 1100mm

 

Do i need to get a proper calculation done etc, or just install a large enough concrete lintel above 

window.jpg

Posted

Well this is delicate....

 

When I altered our garage to habitable space I checked with the building inspector.

Posted (edited)

Ideally you should get proper calculations done. But you only have one block above the window and you're probably going to be removing it to get the lintel in. So I'd replace that block with a lintel and a course of bricks. Propose a lintel depth that avoids cutting bricks or extra thick mortar. See if BC ask for calculations. 

 

The length of the lintel should be at least 300mm (2×150mm) longer than the opening. Round it up to next available length or perhaps the nearest whole or half block. Whatever is easier/available.

 

standard-1200-min.thumb.jpg.b4655afd5641f85975c6899b7945a139.jpg

Edited by Temp

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...