Onoff Posted March 9, 2022 Share Posted March 9, 2022 I'm in the market for a set of 3G patio doors. Yes the place is heat leaky like a sieve but I have to start somewhere. This as part of a lounge / diner knock through. Very rough dimns of the patio doors are 2030h x 2070w. The height will need to increase as the lounge floor is at the moment much too high compared to the dining room (floor), in fact there's a ramp. (It's a lot more than a simple knock through tbh). Ideally I'd like to up the window width to circa 2400mm but I'm not sure how wide the lintel is above. Should I look at "off the peg" or go bespoke once I have a size? I've heard 3G patio doors are rather heavy on the rollers? Link to comment Share on other sites More sharing options...
Jilly Posted March 9, 2022 Share Posted March 9, 2022 I have 3G sliding patio doors and a set of bifolds made by a local company. They are Aluminium and work very well, nice clean to move. Not fingertip light but very easy. I went to look at the showroom where they had double glazed samples but were confident they would work properly. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now