Onoff Posted February 6, 2017 Author Share Posted February 6, 2017 1 hour ago, Nickfromwales said: I'd also say just fit one and set it as high as you can tolerate at the basin. That'll give plenty for the bath as hands are more tolerant than your 'white bits'. Don't think I can do that as I want CWS tank cold feed to the bath and mains cold feed to the basin. So at the mo, hot comes in from the right goes down to the bath then jumps across left to the basin. Cold from the CWS comes in from the right and goes to the bath. The unconnected pipe is for the mains feed to the basin. I'm thinking I'd need to introduce a non-return valve(s) somewhere? Link to comment Share on other sites More sharing options...
Nickfromwales Posted February 6, 2017 Share Posted February 6, 2017 Nope. Just leave it for now and do the TMV's after you fit the UVC. Link to comment Share on other sites More sharing options...
Onoff Posted February 6, 2017 Author Share Posted February 6, 2017 2 minutes ago, Nickfromwales said: Nope. Just leave it for now and do the TMV's after you fit the UVC. I'll have grandchildren before I fit a UVC! Link to comment Share on other sites More sharing options...
Nickfromwales Posted February 6, 2017 Share Posted February 6, 2017 More reason to leave it for now . Or bite the bullet and crack on with the UVC ASAP ( e.g. now ) 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now