Search the Community
Showing results for tags 'electic underfloor heating'.
Found 2 results
-
Hi Guys, Looking for some advice on options for heating a small 1 bed flat being build above my garage. Space comprises open plan living/kitchen area with adjoining bathroom and separate bedroom. Approx 50m2, U Values roof =0.13, Walls = 0.13, Floor = 0.19, roof lights = 1.0. Heating needs to be electric and a self contained system. Options I was considering were either electric UFH or electric radiators. Preferred floor finish would be engineered timber so not ideal for UFH I am told. I've just learned of a third option using a small electric boiler and traditional wet radiators. This seems to be the cheapest to install. Does anybody have any experience of this type of system? Thanks in advance.
-
Currently have a 300 litre UVC ready for a heat pump to handle hot water + heating at a later stage but in the meantime like several others on the forum I would like to add a Willis heater between the manifold flow/return to run our UFH system. System is 3 x 100m loops all to be run as one zone in a 100mm screed. Wunda manifold is installed minus a pump at this stage. Wiring wise 3 core + earth from the stat is in place and power can be added from the plant room board easily. I would like to finalise and order the necessary components so if someone could advise if I've missed anything it would be greatly appreciated... Wilo manifold Pump from Wunda + Isolators Digital room thermostat (recommendations?) Willis jacket + immersion Timing Switch to ensure E7 use Electricians will fit all wiring and controllers but I supply everything. Possibly a 2 port valve as per @Nickfromwales recommendation in this thread but not sure if this is necessary? Trying to keep it as simple as possible at this stage.
