Clive Osborne

Nobody " Just drops in " I dont think there is much point anyway. I'm happy to share test results and you will be more than happy to try and pull them apart. But they are independent I can't really do more than that. Please understand i posted on here after someone posted the below. We are a small UK manufacturer and found this both insulting and incorrect.I will post test results soon. Nexgen are just hype merchants who skate around the advertising rulesusing carefully chosen words to suggest that their heaters"might" be more efficient than others, as a way of fooling those who just have no grasp of the basic laws of physics.

As I said let's work on heat loss per square meter. What is it ? I have never seen an EPC that gives correct heat loads if you have full heat loss calcs post them here . As I said quite happy to go through it. How many air changes per hour ?

Hi Dave Nexgen is not a panel it is 0.5mm thick and goes on walls and ceilings like wallpaper . We embrace the correct temperature/wavelength to get the best FIR performance possible.Thanks Clive

This is what you put originally Nexgen are just hype merchants who skate around the advertising rulesusing carefully chosen words to suggest that their heaters"might" be more efficient than others, as a way of fooling those who just have no grasp of the basic laws of physics. Also why I replied. Obviously I find this insulting and you could have just asked us directly. As I said we have independent testing and I am quite happy to share it on here when we have everything back. I can tell you now there is a difference.We are not hype merchants or trying to fool anybody. We manufacture here in the UK and you are more than welcome to come and see us via appointment at the factory .

I was asked a question about SAP and answered it

Nobody has said that it's over 100% efficient. Other forms can be due to heating air via convection. Nexgen also harnesses the full benefits of FIR . Both in temperature in wavelength. As I have said in other posts we will reduce independent tests soon I will post them

Please note we use Far Infrared not mid or near. We also get much more benefit on walls and ceilings than any other heating . To see the benefit of far infrared skiing whilst the sun is out is a great example

Well we do not know what the new SAP is . I was in Westminster in the Ministry of Housing late last year. Fact is CO2 emissions on generation of electricity are now in line with mains gas. Our government puts a green tax on electricity of 17% on Gas 1.8% ! So now they will work on CO2 and power used. I have no idea how they are going to work it out. But still happy to answer any questions. We have full independent testing coming out soon. I can tell you it uses less power than other forms of electrical heating. We will publish soon. The UFH Mats with wire do not heat 100% of the surface just the wire. We heat the whole area . They say 150w to 200w PSM for primary heating. We are a maximum of 120 watt PSM as a primary heat source. Surface even temperature is the same. The whole area heats up in less than a minute. Graphene and Graphite give us a very low resistance . Around 4 to 12 ohms . Wire mats around 300 ohms. Apply ohms law and you will see why we run in low voltage

This is nonsense far infrared penetrates clothes. Some energy is absorbed by the material but not all.

Let's work on heat loss per square meter and go from there. Then I am happy to go through it with you.

Again happy to discuss. All electric heating is going onto SAP. Its historically based on C02 emissions . From the ground up . It's nothing to do with our product but the government just realising that we dont produce 100% of electricity totally from coal anymore.

Nexgen goes on the surface of plasterboard or Ceilings not behind it. We also fit under carpet. Far Infrared changes wavelength with temperature and will not penetrate all items.Nexgen is far infrared heating. However if you put our product into a metal panel at 70C its radiant heat. We do not sell in panels .Again happy to be taken to task on questions here.

I'm from Nexgen Heating happy to be taken to task on the hype merchant skirting around advertising laws. You comment regarding an electrical heating system from 1950s being the same running cost as Nexgen . I'm happy to be taken to task as well.

I am from Nexgen technical happy to discuss anything on a open forum here. I have no idea who you spoke to but it wasn't me.

Hi Eagle Remewables are not an approved reseller or installer of Nexgen. Happy to answer any questions. Old post I know but I have only just seen it. Thanks Clive