AmKal

Hi, yes the MDPE pipe goes behind the tank around the side of the storage room and then the builder has made a gap for it to come out by the front to be connected to mains. The black pipe is indeed the main supply - oh man! What do you mean by if the tank went? I'm assuming this all looks bad too, see pics??

There are plenty of tears in the polythene as well as scaffolding pipes still in the ground that builder will 'fill' once removed. 🙄 Insulation boards are not that stable in places. So I assume it must all be flat and crisp to the ground?

Hi to everyone. I'm in the middle of a project that has me worried about the layout of pipes. 1. The mains water comes out of the ground (island will be on top) and then is to be buried screed 90mm and joined on to a pipe that goes through to the store room whilst going over UFH pipes to the boiler and tank. The tap to turn off the water is located here. Is this normal, okay? Is it safe? 2. The pipe work looks okay, it's separated a little, but the cold runs over pipes and join the store room with a tiny elbow to be covered by screed, is this safe? 3. Do I need a stop tap under the island from where the main water emerges from the ground or is it safe for it to travel in screed and then have a stop tap. I've attached a few pics, really hope you can help in anyway.

Thank you

Thank you. Does the party wall come in to it at all? Can't it just be moved as you say 5m away from buildings?

Hi, Thank you in advance for your help. Currently in the process of building a double storey wraparound. The driveway has been dug up to reveal two soakaways for two house to my right. The neighbours front gutter and rear gutter rainwater. Architect isn't sure in how to proceed. Neighbours are okay with moving the pipework so the soakaways are in my garden and happy to pay a little toward it! Does a party wall surveyor need to be involved? Architect thinks so? Build has stopped until this is sorted. Any ideas on how to proceed so I can bump the architect? Thank you!!