Hi All

 

We are going to be designing and hopefully doing our driveway in the new year. We are going to go block paving and now we are just looking at lighting as its very dark on my driveway area

 

One option we were looking at is the drive over spot lights, has any body got these and happy with them? Or would a bollard type light be better?

 

Could any recommend any driveway lights they have used at all?

 

Speaking to the driveway guy (not an electrician) as there is soft dig either side of the edge of my driveway he said on some previous jobs the electrician has ran SWA between the lights in a wiska JB with magic gel and then flexed out the light. Then buried the JB and cables adjacent to the light in the driveway. Is this the standard way of doing it? best install method?

 

Any advice/information greatly appreciated on this as obviously its not an easy/cheap fix if you want to change it

 

Many Thanks

My drive is very dark (till you enter it and a little floodlight comes on). Seeing the gateposts was the biggest problem when reversing out (yes I know but it was like this when I bought it) so I put vertical LEDS on the gateposts which activate when the electric gate is open and also controlled by a light/dark sensor so no operation during the day.

aha @joe90    Gentry spotted .... B engine?

32 minutes ago, Originaltwist said:

aha @joe90    Gentry spotted .... B engine?

Well spotted, no triumph vitesse 2 litre mechanics, goes like stink and great fun (if your brave).will be up for sale next year, I believe it has a true 7k miles on it as I found it in a shed at Heathrow. The straight 6 cylinder engine sounds gorgeous (much better than the standard herald engine in most of these.

Edited December 28, 20241 yr by joe90

Nice one Joe.

Sorry @richo106 for the brief hi-jack.  I know nothing about driveway lights so that makes me qualified to comment. In-drive spots shine upwards so are only effective if there is stuff nearby to be illuminated. Pillars shine to side and down and must be more effective, also the cable terminations can be safely elevated.