Mppt amps more than panels allow?

[Fox]

Hi. 

 

Just finished my first setup and I've noticed something, not sure if it's OK or not. 

 

I've got 6 x 250w panels rated for 8.21amps in series 

 

Yet I've noticed that in full sun solis inverter show more than 10ams mppt? 

 

Is it exceeding panel max specs or these are different amps 🤔.?

[SteamyTea]

The panel amps will be under standard testing condutions, so they may well produce more when colder and solar power is higher.

 

"Standard test conditions (STC) is commonly used and assumes 1000 W/m2 solar irradiance, AM1.5 spectrum, and a cell temperature of 77°F(25°C). AM1.5 spectrum refers to a 1.5-atmosphere thickness (air mass or AM) corresponding to a solar zenith angle of around 48°."

 

https://eepower.com/technical-articles/understanding-pv-system-standards-ratings-and-test-conditions/

Edited June 1, 2024 by SteamyTea

[Fox]

Ah OK so nothing to worry about? 

[SteamyTea]

It will be fine as long as it is set up to UK standards.