UFH - bunching flow and returns?

[Bramco]

Thanks for the input and good to hear you've done lots like ours that have worked.  It was an option to have the plant room where the utility is but then we wanted the ASHP on the side wall and wanted to keep the runs to that as short as possible.  All these variables that affect the design.

 

My thought earlier though on the manifold, was to have 2, one in the plant room for everything left of the hall/utility wall and one in the plant room for the utility and everything to the right.

 

Will talk to the folks who are doing it about insulating the supply runs in the hall.

 

Simon