Search the Community
Showing results for tags 'push fit'.
-
When I poured the slab (Passive) I put two 15mm pipes in for the H&C for the island unit. Due to a change in layout of the island unit I still need the pipes but they need to be longer so I either put in some 15mm straight connectors and continue the 15mm pipe or I can push through some 10mm inside the 15mm pipe that I already laid in the slab and have one continuous pipe right through to the base unit that will have the boiling water tap and tee for the DW so avoiding a connection under the island unit. I am doing a manifold system for the H &C system thus avoiding connections in inaccessible places so being anal what do I do. No great problem just be interested to see what people would do? TIA
-
I have to run about 7 plastic pipes from plant room down a corridor to bathrooms etc. I will build a stud frame in the ceiling approx 100mm in depth and this will accommodate my MVHR ducting, plastic pipes and cable runs. Due to the nature of the area above the stud detail and not wanting to bring the ceiling down any lower I just want to place the plastic pipes between the MVHR ducting (in the gap at the bottom) without clipping down to the timber. Is this ok as the pipe will be well supported by the 4 x 1 battens that I will fix the plasterboard to or does it need to be clipped? TIA
- 2 replies
-
- pipe clips
- plastic pipe
-
(and 1 more)
Tagged with: