Search the Community

Hello All, I have what was an old pond/roman bathing pool in my garden. To give some context it's 230cm (L) x 150cm (w) and approx 100cm deep. I would like to get rid of this, and redo the whole garden. I am thinking of having a nice clean lawn. I have started to demolish the pond. The base has been broken, and now going step by step. However I don't know if I should fill the hole with the broken concrete and rubble, or to break and fill it with soil? Looking on sites a 1ton bag of soil, is around £70, and I will likely need three to fill it, which is fine. I will likely need more, for the rest of the garden, nonetheless. Main question is with the broken rubble. Do I fill the hole with it, or remove it all, fill with soil? Thank You

We're planning to put a fairly substantial wildlife pond onto the agricultural part of our new plot. I understand that we need to apply for PP for this as it will be quite large. Has anyone else gone through this process and is there any advice to be had?

To disguise our borehole, which is a raised concrete section 600 x 450 inspection chamber, we've built a circular stone wall around it, about 1500mm in diameter (about the smallest diameter we could manage). This is built on a hefty concrete footing, that seals to the pre-cast concrete inspection chamber section. I've added another inspection chamber section, so the borehole casing, inside the stone ring is now about 30mm above it and I have capped it with a 900 x 600 sandstone. The stone ring is around 400mm high, and we're now left with an annular space around the borehole head chamber and are thinking of turning it into a water feature. There's no risk of contaminating the borehole, as the borehole itself has a sealed cap, plus there's a 100mm drain leading from the base of the head chamber to a soakaway. All the electrics in the head chamber are IP66 sealed. What I'm looking at is the best way to seal both the outside of the precast chamber sections, the concrete base and the inside face of the stone wall. My initial thoughts are to parge coat the inside of the masonry to get it smooth and fill any bigger voids in the mortar, add a strong mortar radius around the base of both the inner face of the outer wall and the base, and between the outer face of the chamber section and the base. Once I have the surfaces fairly smooth, I was then thinking of using something like G4 PU sealant to seal the whole of the inside. I'll build in an overflow pipe and also a fill pipe, and as there's power there we may well add a pump and some form of gentle water feature later. The "pond" will be planted, with raised platforms for things like water lilies, maybe some irises, but won't have fish in it. Does the above sound sensible? I'll try and take a photo tomorrow, to show how it looks at the moment.