Search the Community
Showing results for tags 'pipe clips'.
-
Hi, I managed to push two 15mm pex pipes through the underfloor space of a second floor. They go (on a straight run between two parallel joists) from a hole in the floorboard (18mm thick) under an existing radiator to another hole in the contiguous room's floorboard, ready to attach a new radiator. Therefore, the pipe portion in the roughly two metre distance between the two holes is currently inaccessible, and merely rests on the lower floor's ceiling. Would that be enough support? Or should I add clips along the inaccessible part to avoid problems on the long run? Thanks. PS: I can add a lagging sleeve to the inaccessible pipe portion, if that helps.
-
- piping
- noise reduction
-
(and 1 more)
Tagged with:
-
I have to run about 7 plastic pipes from plant room down a corridor to bathrooms etc. I will build a stud frame in the ceiling approx 100mm in depth and this will accommodate my MVHR ducting, plastic pipes and cable runs. Due to the nature of the area above the stud detail and not wanting to bring the ceiling down any lower I just want to place the plastic pipes between the MVHR ducting (in the gap at the bottom) without clipping down to the timber. Is this ok as the pipe will be well supported by the 4 x 1 battens that I will fix the plasterboard to or does it need to be clipped? TIA
- 2 replies
-
- pipe clips
- plastic pipe
-
(and 1 more)
Tagged with: