Leaderboard

First time DIY self building and my fault to be honest. Hubby knows how to build, but not really how to read plans, he's used to be told, do this, do that and then do the other. Plans are down to me and I've been so busy at work that I didn't stop long enough to even think. Not again, I've spent this time going over everything again to check, double check and then do it again. This wall was also supposed to be under-pinned, but when we took out the floor as per the plans the walls turned out to not be attached to the existing foundation and after one fell down it became clear that this bit of the build needed to be done from scratch. This also necessitated involving the LPA as the existing plans were for single skin and EWI not a cavity wall, which is why there wasn't enough bearing space. The other option given us by SE was to put in secondary foundation inside what we had poured, but then that had to be attached with horizontal rebar and vertical mesh as well as the existing mesh. So, knocking down the cavity wall up to damp proof was a much easier option. The shear links are attached with metal ties, bit like cable ties, but metal in the middle of each mesh, so that side is 100mm so shear links are also 100mm. There are also 'foam' expansion sheets around the wall at 20mm thick to allow for any movement of the slab / mesh. Barn conversions are definitely much more tricky than new builds.