8 hours ago8 hr Shower trays have arrived and will be installed by the plumber in the next week or two. All good so far.We have some schluter membrane and corners (the trays go into a single corner, so two two sides against two walls). The trays are bette steel trays, and will be set on CT1. There is some expansion on the trays and so on the advice of the merchant I bought some bette tape to seal the perimeter. Bernard the builder told me that we don't need any schluter adhesive because the tilers, who will do the tanking, will use tile adhesive. (we have kerakoll S1 on site already so am assuming this is what they plan to use). Is this right? Questions are... 1. I believe that standard tile adhesive is not water tight and something like KERDI-COLL-L should be used to seal the tanking membrane overlaps. Is tile adhesive ok everywhere?I think Bernard the builder likes to tank down to the tray and then silicone the join. Tape seems better and we have is on site. Is it worth the extra agro?Should we also tank the floor (concrete) next to the shower tray
Just now1 min 8 hours ago, Mr Blobby said:Shower trays have arrived and will be installed by the plumber in the next week or two. All good so far.We have some schluter membrane and corners (the trays go into a single corner, so two two sides against two walls).The trays are bette steel trays, and will be set on CT1. There is some expansion on the trays and so on the advice of the merchant I bought some bette tape to seal the perimeter.Bernard the builder told me that we don't need any schluter adhesive because the tilers, who will do the tanking, will use tile adhesive. (we have kerakoll S1 on site already so am assuming this is what they plan to use). Is this right?Questions are...1. I believe that standard tile adhesive is not water tight and something like KERDI-COLL-L should be used to seal the tanking membrane overlaps. Is tile adhesive ok everywhere?I think Bernard the builder likes to tank down to the tray and then silicone the join. Tape seems better and we have is on site. Is it worth the extra agro?Should we also tank the floor (concrete) next to the shower trayI’d be very wary of sticking a metal tray down with cementitious tile adhesive. Check directly with the manufacturer before proceeding. Tanking solution goes on the walls first, then the strips / tape, then you do 2 more coats of tanking over that. Do NOT tape onto the tray! Walls get tanked, tray gets sealed to the tanked wall. Do NOT use silicone, use CT1 or OB1, as silicone is not great for fundamental sealing / fixing things in place, and should only be used for cosmetic sealing.
Create an account or sign in to comment