Hep2O the last metre
What would you recommend for the last bit of a water connection when using Hep2O? If I have a pipe going up a wall and ideally chased in, should I use an elbow to come out of the wall or keep going with the same bit of pipe and then use something like one of their flexible connectors? That would leave a potentially ugly to plaster around bit though.
https://www.screwfix.com/p/hep2o-push-fit-flexible-tap-connectors-15mm-x-1-2-x-300mm-2-pack/1250f
For showers I am swa
Copper out the wall is still naff to plaster around/look at if you're then going to a tap of some kind.
How about wall plate elbows?
https://wavin.com/en-sg/product/f0bb1231-b2fc-4949-8c8d-bd4a6615a933
Run hep to that. Screw in a plastic dummy. Plaster. Unscrew plastic dummy. Screw in either an ISO valve then the tap hose or a hose with a 1/2" male end; through a rosette to hide the plaster edges.
As above is how they do this by defau
