For some time, I've been considering the best way to integrate my cooker hood during MVHR installation. Having read the good words on here, it seems that direct integration from hood to MVHR is a BAD IDEA, so I've come up with this- Comments appreciated.
My situation is this:
1) Large kitchen diner with induction hob plus 600mm externally vented extractor hood. There is no room to replace the extractor with a wider hood due to cabinets being in place. The hood does not cope with cook
It seems i'm the odd one out as I'm not happy with the outcome of our hob extractor. We've been living in our house since early May and cook most nights. We have a very expensive Novy extractor fitted directly above our induction hob, probably only 55cm distance between the hob and the extractor. It can vent outside, but as we have MVHR we bought the carbon filter recirculation kit and so it just vents out the bottom of the adjacent wall unit, onto the worktop that is about 50cm to the right of