Jump to content

Possibly inappropriate confession: but what else could I do?


Recommended Posts

Grrrr.... 'ow 'dya solve this annoying little  problem then?

 

The edge of our mezzanine is supported by a doubled POSIs.  The joists are joined by a simple metal plate (made by Cullen's), part of which is nailed on the top of the joist - like this.

20190306_123752.thumb.jpg.e72f3cbb1a5fdb52b45c711bee85ca49.jpg

In profile, the clip looks like this

 

20190306_123821.thumb.jpg.2ec5ed299532c777df762935ca6a0986.jpg

 

So far so good - until you come to put floorboards over the top. 

When a clip happens to ' land ' in the middle of the floorboard, you just cant slide the board into place.

I've tried using those very very expensive floorboard jacks - three of them. Nada, nichts, nuffin.

 

So (read this bit while checking a BCO isn't looking over your shoulder) I nailed through the top chord  (5 nails) and removed (angle grinder) the top of the clip.

 

Boards slid in like they were on rails. And they were in turn glued and screwed to the top chord.

 

How do normal ( for that read ' experienced ' ) people solve the problem?

Link to comment
Share on other sites

Rout out a recessed area in the back of the board so the clip sits up into a recess?

 

Put the clip on the inside of the chords, and that funny sticky out bit that would then be outside, grind it off.

 

 

 

 

Link to comment
Share on other sites

9 minutes ago, ProDave said:

[...]

Put the clip on the inside of the chords, and that funny sticky out bit that would then be outside, grind it off.

[...]

Both top and bottom board clips point ' into' the POSI ..... but I like your thinking.

 

10 minutes ago, PeterW said:

Errr.. same as you !!!

 

That a relief then. Excellente tennente!

Link to comment
Share on other sites

4 minutes ago, Russell griffiths said:

Your learning 

keep it up. ??

 

Thanks.

I'm starting to enjoy it all a bit more now. And just as I'm getting reasonably  competent, and frankly a good deal less worried about guidelines and authority, I'll have finished....

Link to comment
Share on other sites

2 minutes ago, recoveringacademic said:

 

Thanks.

I'm starting to enjoy it all a bit more now. And just as I'm getting reasonably  competent, and frankly a good deal less worried about guidelines and authority, I'll have finished....

Had a slight chuckle there,  you're never really finished. 

Link to comment
Share on other sites

1 hour ago, recoveringacademic said:

and frankly a good deal less worried about guidelines and authority

 

Ah, this is what I have to look forward to. 

Neophyte here. Any tips? Which guidelines and authorities can I practice not worrying about?

Edited by Dreadnaught
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...