DeeJunFan Posted August 18, 2016 Share Posted August 18, 2016 Hi Guys, Just wondering if anyone could give me an idea of the cost for wall chasing? Also is it a DIY job? I can get a HILTI wall chaser for 2 weeks for about £60? Thanks Damian 1 Link to comment Share on other sites More sharing options...
PeterW Posted August 18, 2016 Share Posted August 18, 2016 Is this in lightweight blocks ..?? Easy DIY job but get some close fitting specs and a decent cylinder mask as you will need it ..!! Ideally do it when there are no windows in the building either ...!! Link to comment Share on other sites More sharing options...
DeeJunFan Posted August 18, 2016 Author Share Posted August 18, 2016 No Full Fat blocks Link to comment Share on other sites More sharing options...
Declan52 Posted August 18, 2016 Share Posted August 18, 2016 It's diy possible if you are mad in the head. My whole house was £200. Took the two guys half a day and they cleaned up after themselves. Dead sore on the wrist and back and unless you have a really good mask you will be eating dust for two weeks. Mine was priced per meter. After I had it all spray painted all the positions my spark sent the guy round he measured up told me the price and I said sold. All done a few hrs later. 1 Link to comment Share on other sites More sharing options...
DeeJunFan Posted August 18, 2016 Author Share Posted August 18, 2016 Now that sounds like a good deal Hopefully getting the slates started on Monday so will be thinking about the indoor work soon enough. Doing it before the windows is likely a very good idea. Link to comment Share on other sites More sharing options...
Declan52 Posted August 18, 2016 Share Posted August 18, 2016 Def get it done then as the dust is unreal. Link to comment Share on other sites More sharing options...
vfrdave Posted August 18, 2016 Share Posted August 18, 2016 If needs must yes it is a DIY job, but you got to like grit in your eyes and the taste of dust! Me and a mate did his and it took us longer than the pros by a mile. 1 Link to comment Share on other sites More sharing options...
curlewhouse Posted August 28, 2016 Share Posted August 28, 2016 Having done this in the past, I'd happily pay to have someone else do it! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now