Hep 20 Manifold

[JohnMo]

Or these, cheaper than making them, just add screw as many sections together as you need. No need to reinvent the wheel.

https://www.screwfix.com/p/reliance-valves-4-port-potable-water-manifold-15mm-x-3-4-/248TY?tc=TA5&gad_source=1&gclid=Cj0KCQjwwMqvBhCtARIsAIXsZpbeISzhvFO7hmEFMvAOeigrG2p8bINv9aaj4gLrCuFMPsFQidtZfR8aAhEmEALw_wcB&gclsrc=aw.ds

[efkor]

28 minutes ago, JohnMo said:

Or these, cheaper than making them, just add screw as many sections together as you need. No need to reinvent the wheel.

https://www.screwfix.com/p/reliance-valves-4-port-potable-water-manifold-15mm-x-3-4-/248TY?tc=TA5&gad_source=1&gclid=Cj0KCQjwwMqvBhCtARIsAIXsZpbeISzhvFO7hmEFMvAOeigrG2p8bINv9aaj4gLrCuFMPsFQidtZfR8aAhEmEALw_wcB&gclsrc=aw.ds

Note that the Screwfix blurb says it can only be used with copper pipe BUT check out the single review .... a self builder has commented that he has bought this item and that it can be used with push-fit plastic

[JohnMo]

27 minutes ago, efkor said:

Note that the Screwfix blurb says it can only be used with copper pipe BUT check out the single review .... a self builder has commented that he has bought this item and that it can be used with push-fit plastic

A copper tail - then convert

[Super_Paulie]

i can confirm both plastic and copper are fine, i have both. Its just a speedfit connection. Copper where i needed to add in compression checks (then converted to plastic underneath) and plastic where i just wanted to keep an unbroken run to point B. Dont have any great photos, but you can just see it here on the right hand side

Edited March 14 by Super_Paulie

[garrymartin]

On 14/03/2024 at 13:14, efkor said:

Note that the Screwfix blurb says it can only be used with copper pipe BUT check out the single review .... a self builder has commented that he has bought this item and that it can be used with push-fit plastic

The Screwfix blurb is wrong. The 15mm versions use JG Speedfit connections and the Reliance website states these versions are "suitable for use with Speedfit PEX and polybutylene barrier pipe [inserts required] and copper pipe" - see https://www.reliancevalves.com/gb/en/products/flow-control/plumbing-strainers-flow-regulators-manifolds/potable-water-manifolds

[Gone West]

13 hours ago, garrymartin said:

The 15mm versions use JG Speedfit connections

They certainly do. I used these several years ago and only used Speedfit connectors.