Dry verge

[Thedreamer]

Seem to be going round in circles here.

 

Spoke to Building Merchant and roofer earlier and they suggest the Klober dry verge uni line S strip, but this seems to be more based for battens rather than in Scotland where slates are nailed directly onto the sarking boards, so I was thinking that there 'Scot strip' would be the better option.

 

http://klober.co.uk/shop/product/uni-line-continuous-dry-verge

 

This is what the end gable currently looks like.

 

Any comments or advice would be appreciated.

Edited August 15, 2018 by Thedreamer

[Jeremy Harris]

We used the Kytun aluminium dry verge.  Should work fine with slates nailed direct to sarking, I think: http://www.kytun.com/c/slate-dry-verge-system/7

[Alexphd1]

We used the T2 profile in the above link directly on to the sarking. Worked a treat apart from the first slate tier when we kicked them out for the bellcast which was a bit of a bugger . Also ordered direct from kloeber in RAL7016 to match windows and facias. We have used tapco plastic slates.

[Thedreamer]

Thanks Chaps.

 

I think I might go down this route.

 

https://www.google.com/url?hl=en&q=http://www.kytun.com/p/retro-fit-slate-dry-verge-aluminium-pack-of-4/p-c03&source=gmail&ust=1534434436095000&usg=AFQjCNHgOdaq_41SMhcW_UkcbUhRrz6zuQ

 

With the verge attached to the bargeboard.