Woodgnome Posted October 23, 2017 Share Posted October 23, 2017 I have an Impey tray fitted, which is flush with the floor. Floor to be covered with waterguard membrane. Electric UFH on top of this, which will also be over the shower tray. Intended to have a thin coat of self leveler on the UFH cables to make tiling the floor easier, but what happens over the shower tray? If I put self leveler on the tray it will loose the fall to the outlet. Am I missing something. Cheers. Link to comment Share on other sites More sharing options...
Nickfromwales Posted October 23, 2017 Share Posted October 23, 2017 Mix some rapid set flexible adhesive to a slump free consistency and smooth over the cables with a grout float. Make a plywood square 50mm bigger all round than the waste and use that as a shutter to stop you getting adhesive anywhere near the gulley and screws. When the adhesive is hard, eg after an hour or so, if its rapid, use an off cut of wood as a scraper to remove any high points. Link to comment Share on other sites More sharing options...
Woodgnome Posted October 23, 2017 Author Share Posted October 23, 2017 Thanks Nick. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now