Jump to content

Microwave size problem


Recommended Posts

Can anyone help with finding a microwave to fit in this Howdens space?

Dimensions are cabinet 590x455 internal and the existing Lamona unit is 480x255.

IMG_20171004_112448084.thumb.jpg.e6c7736006884a0fa692a581323a26eb.jpg

IMG_20171004_112423552.thumb.jpg.3f873096fc42007069f53dbbd1bcf218.jpg

As you can see there is a snap on trim.

Can't source the doors anywhere, glendevon oak, discontinued. Ditto Lamona ovens...?

Link to comment
Share on other sites

Can't help other than to say I hate "built in" microwaves because they are all just a bodge fitting of a free standing MW and a surround trim.

 

Why does nobody make a proper built in microwave, built to standard built in oven dimensions to be built in properly?

Link to comment
Share on other sites

We have full size fitted neff microwave in our kitchen, approx those dimensions, does not have rotating centre though only slatted shelf

Edited by Jml
Link to comment
Share on other sites

It's not the one with the black sides, but here is a stainless steel Lamona trim

 

http://www.ebay.co.uk/itm/Integrated-Microwave-Frame-Kit-Lamona-/142519546723

 

As an aside to @ProDave's question, Siemens now do full size ovens with a built in microwave, we have gone for two of these rather than a full size oven and smaller microwave.

 

They aren't cheap though! Luckily our kitchen supplier had some of last year's model at a much lower price.

 

http://www.cameokitchens.co.uk/product.php/21774/siemens_hm678g4s6b

 

 

Edited by AliG
  • Like 1
Link to comment
Share on other sites

@Tennentslager 

 

I think this should be relatively straightforward, but there needs to be a little careful research.

 

3 hours ago, Tennentslager said:

Dimensions are cabinet 590x455 internal and the existing Lamona unit is 480x255.

 

I think that 590x455 is a standard (plus or minus a few mm) size - my built in microwave with a warming draw beneath is in exactly such a hole. And minor adjustments (say +10mm in height or -5mm each side in width should be allowable for (eg trim the wooden top panel and paint the edge or fix a couple of strips of dark timber down the edges). So

 

1 - My previous setup was microwave mounted on rail kit on the shelf with cosmetic alu or stainless surround panel. I found one sufficiently the right size to fit the existing panel and even the mounts by taking some measurements and taking the surround panel and a tape measure into my local Curry's and measuring all the freestanding microwaves until I found an acceptable one that fitted closely enough. I might have had to move one mounting rail 10mm but that was about it. 

 

2 - Equally you may find that if you talk to the shop or manufacturer they may well have panels to fit all of their built-in microwaves that match your standard size hole for £10 or £25.

 

3 - It is quite fruitful putting "built-in microwave 590mm 455mm" into Google.

 

 4 - Some of the bigger online sites have filters for different values of height and width. eg Appliance World Direct

http://www.appliance-world.co.uk/microwaves?sort=na&perpage=12&price_slider=£68+-+£13439&opt[]=22_3858&opt[]=23_3859

 

My local superstore does not offer this filter but just their microwave page suggests at least 2 or 3 close to your requirements from the first page of results.

https://www.appliancesdirect.co.uk/st/integrated-microwave-ovens

 

So you have several options.

 

Ferdinand

 

 

Edited by Ferdinand
Link to comment
Share on other sites

As an alternative, my microwave has now come out onto the worktop, and the hole is being turned into a 600x600 worktop space using a single porcelain mottled-grey big floor tile trimmed on one side.

 

Seems to work OK, and will have painted MDF liner inserted.

 

IMG_0579-s.jpg.dd4d17e560438f45a1c42affce58cf77.jpg

 

IMG_0581-s-crop.thumb.jpg.fe8c44db04b1c80e22473431751b141c.jpg

 

IMG_0582-s.jpg.3a72bec81203383827b40b239550f7e1.jpg

 

 

 

 

 

 

Edited by Ferdinand
Link to comment
Share on other sites

Totally misread it, I thought you had somehow lost the trim.

 

This appears to fit

 

http://ao.com/product/uim600-newworld-microwave-stainless-steel-26817-50.aspx

 

Also in order of price, the last one is a Bosch combi which is nice but more expensive.

 

http://www.cameokitchens.co.uk/product.php/24061/aeg_mbe2658sb

 

http://www.cameokitchens.co.uk/product.php/24062/aeg_mbe2658sm

 

http://www.cameokitchens.co.uk/product.php/24059/aeg_mbe2658dm

 

http://www.cameokitchens.co.uk/product.php/21603/bosch_hbc84h501b

Edited by AliG
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...