Jump to content

Cable in or under slab for kitchen island


Recommended Posts

Hi

If running cable for an induction hob in a kitchen island, what’s the best way to run the cable.

I’m digging footings next week so the slab has not been poured yet so can run the cable under the insulation or on top of it, what’s the recommended way or regulations for this.

Edited by Chanmenie
Link to comment
Share on other sites

Just a hob or ring main too ..? If it’s a 6mm for the hob (current dependent) and a pair of 2.5 for a ring main / sockets then use 40mm waste pipe with  slow bends or pairs of 45 degree sockets on the ends to bring it up where you need it. Pin it down to the insulation and concrete over. 

Link to comment
Share on other sites

59 minutes ago, PeterW said:

Just a hob or ring main too ..? If it’s a 6mm for the hob (current dependent) and a pair of 2.5 for a ring main / sockets then use 40mm waste pipe with  slow bends or pairs of 45 degree sockets on the ends to bring it up where you need it. Pin it down to the insulation and concrete over. 

6mm or 8mm for the hob and yes probably a ring for some sockets and the led lighting for the handleless rail  

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...