Jump to content

Thermal Performance - SIPs vs Bockwork + Insulation


Recommended Posts

Hi guys,

 

I still have not made my mind up on going full SIPs for my garage build. I have got a friend who would be willing to do the blockwork for the walls, but I am thinking about the thermal performance as I plan to use the garage as “living space” (gym and an office in the roof). The garage would be 6x8m with a double garage door.

 

If going with the blockwork for the walls, I envisage building hybrid, having the roof done with SIPs (194mm panels). If I were to go for a full SIPs build, the wall panels would be 144mm. 

 

So my question is, in order to achieve a similar performance, what kind of internal insulation I would have to apply for the walls (single skin)?

 

Thank you for your thoughts

Link to comment
Share on other sites

hello @hmpmarketing

 

assuming the same type of insulation as in the SIPS panel (usually EPS or PU) then you will need an amount equal to 80-90% of the thickness of the insulation in the SIP panel as the blockwork will only contribute around 20% of the overall thermal resistance for approximate parity

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...