WWilts Posted January 7, 2022 Share Posted January 7, 2022 (edited) Catnic type lintels for traditional cavity wall. Window openings. Exposed brick exterior. Outer leaf, under lintel. What do people put there? Or do they leave the steel (and thermal bridge) exposed? Is there a good looking version of jablite to glue on? or just insulated plasterboard? Something else? Edited January 7, 2022 by WWilts Link to comment Share on other sites More sharing options...
nod Posted January 7, 2022 Share Posted January 7, 2022 I used a PU glue and fixed a plastic 50 mil trim to match the frames 1 Link to comment Share on other sites More sharing options...
Faz Posted January 7, 2022 Share Posted January 7, 2022 I am just going to leave mine bud - can't use insulated pb as it is exposed to weather and would melt. Tbf - no-one but me would ever spot it tbh - you could always order up some upvc strips but it will look like a bodge and draw more attention than the bit of steel. 1 Link to comment Share on other sites More sharing options...
PeterW Posted January 7, 2022 Share Posted January 7, 2022 The thermal bridge is tiny - usually get left or if you really want to cover it you can glue something to it like @nod says 1 Link to comment Share on other sites More sharing options...
tonyshouse Posted January 8, 2022 Share Posted January 8, 2022 Separate lintels for me every time inner and outer alternatively check lintels which leave room for insulation in the head. 2 Link to comment Share on other sites More sharing options...
nod Posted January 8, 2022 Share Posted January 8, 2022 These have been on for four years 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now