Jump to content

Door to garage detailing


Moonshine

Recommended Posts

I have a door from an internal space to a integral garage that is in block work as below, this is how it is shown on my BR drawings, but i want to make sure that this structural opening in enough for the 762mm door.

 

Does anyone have a example of the detail of this type of door, i presume its need a cavity closer in it too. around the perimeter that the opening will need to account for.

 

image.png.1a3044bad0d7d261a5ae40f7a4dba675.png

Link to comment
Share on other sites

Cavity closer will be 2-3mm at most. You want a decent fire door frame in there - and also make it an 838mm door too. 
 

An FD30 trenched frame for a larger door is 906mm wide, so with 5mm either side you would be well to put a 920mm structural opening in and also go with 145mm deep frame too. 
 


 

 

  • Like 1
Link to comment
Share on other sites

2 hours ago, Russell griffiths said:

Why have you gone for a 762 door, far too small in my opinion. 

 

Its a tight space, as below due to the steps not shown in the previous image, though a 920mm SO may work if i shift the stairs a little bit.

 

image.png.99a40910ddf3febb9020cd268e4ee131.png

Edited by Moonshine
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...