MortarThePoint Posted May 18, 2021 Share Posted May 18, 2021 (edited) An alternative shutter approach is to use some short lengths of narrow rebar, some wire and some OSB3 strip (about 150mm wider than gap. Pass a loop of wire through the gap and round the OSB. Secure the wire tight to the rebar on top of the planks. Do this at each end of the OSB. Then fill the created pocket with a cement ballast mix. Guess you could use timber rather than rebar if you the cut the wire later. Otherwise you can just leave the rebar in place Edited May 18, 2021 by MortarThePoint Link to comment Share on other sites More sharing options...
MortarThePoint Posted May 18, 2021 Share Posted May 18, 2021 Interesting to see how these sorts of things are done in other countries. They made the hourdi blocks onsite. https://youtu.be/lF7aSes4gcU Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now