petewood Posted April 4, 2021 Share Posted April 4, 2021 Hello. I have Reynaers patio doors at my property and the handle for the inside door has come off. I can place it back on but it's loose and falls off. Curiously, there is a threaded bolt in the end of the handle spindle place where the handle attaches to the door. The handle has a thread inside. I'm at a loss as to how I thread the bolt into the handle given the spindle is square and means I cannot rotate the handle onto the thread. Noob question I am sure! Any help greatly appreciated. Link to comment Share on other sites More sharing options...
PeterW Posted April 4, 2021 Share Posted April 4, 2021 Remove the two Allen bolts and the handle comes off. Re-fix the handle - doesn’t the cover have a hole in the size of the round handle cross section and the cover rotates ..? 1 Link to comment Share on other sites More sharing options...
ProDave Posted April 4, 2021 Share Posted April 4, 2021 Lets see the other side of the handle, a view of the handle on the door for example? Is there a "cap" you can remove to give access to a nut to tighten it on? 1 Link to comment Share on other sites More sharing options...
petewood Posted April 25, 2021 Author Share Posted April 25, 2021 Apologies for the non-reply to these comments. I'd been waiting for an email to notify me of replies and only noticed today that isn't on by default ?♂️ Thank you both for your replies. It was actually a bit of a combination of the 2. I removed the two Allen bolts and the silver base came off on both sides. A similar Allen bolt is threaded through from the other side into the handle on the inside which I tightened to solve the issue. Thank you for your time. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now