canalsiderenovation Posted February 8, 2021 Share Posted February 8, 2021 Hi I really need to get this done sorted for the solar. Anything over 3.68 is diverted to the solar immersion. Can anyone advise what info I should be putting onto this chart. I am presuming the details I should be recording is the inverter, so the Growatt 3600MTL-S? Thanks Link to comment Share on other sites More sharing options...
canalsiderenovation Posted February 8, 2021 Author Share Posted February 8, 2021 Oh I forget to upload the form.... Link to comment Share on other sites More sharing options...
trialuser Posted February 9, 2021 Share Posted February 9, 2021 Well, no one seems to have replied, so this is what I'd put, assuming youi have the 3.6kW Growatt inverter.. Growatt, yesterday ish,1, Growatt3600MTLS2018, 3.6kW, 1. 1 Link to comment Share on other sites More sharing options...
ProDave Posted February 9, 2021 Share Posted February 9, 2021 Sory missed this first time around. Look in the instruction manual for the inverter. there should be a G98 conformance certificate from the manufacturer and you want the details from that, or just send a copy of that certificate. If you don't have one, contact the supplier and ask for the manufacturers G98 compliance certificate. Our DNO got a bit shirty because my inverter had "4000" in it's part number and they did not believe it was limited to 3.68kW until I forwarded the manufacturers declaration to say it was. 1 Link to comment Share on other sites More sharing options...
canalsiderenovation Posted February 9, 2021 Author Share Posted February 9, 2021 Just had a root around and I think I have it here, well actually we have two not sure if I should send both. Link to comment Share on other sites More sharing options...
canalsiderenovation Posted February 9, 2021 Author Share Posted February 9, 2021 42 minutes ago, trialuser said: Well, no one seems to have replied, so this is what I'd put, assuming youi have the 3.6kW Growatt inverter.. Growatt, yesterday ish,1, Growatt3600MTLS2018, 3.6kW, 1. Thank you for this. In the box that says 3 phase I'm guessing that is blank and in the single phase PH1 I'm putting 3.6kW and then 1 in the power factor box? Link to comment Share on other sites More sharing options...
trialuser Posted February 9, 2021 Share Posted February 9, 2021 (edited) yes, it says at the top to use ph1 if single phase. This is the bumph I found Actually that must be a later one dated 2019 ? GROWA_00749_200713073708-1.pdf Edited February 9, 2021 by trialuser Date 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now