Moonshine Posted November 21, 2020 Share Posted November 21, 2020 I am doing the electrical layouts for my house design, and i am now thinking about house alarms. The alarm that i have in my current house is wired PIR sensors in each room, with magnetic switches on doors. This is obviously old tech, but in modern alarms are wired PIR sensors still used? if so it would make sense to show them on the electrical plans as wiring them at first fix would be so much more easier than retrofitting. Or has the world of house alarms moved on significantly? Link to comment Share on other sites More sharing options...
Oz07 Posted November 21, 2020 Share Posted November 21, 2020 I've stuck with the traditional version. KISS. also have one in a duct going out to garage. Set separately at nights. 1 Link to comment Share on other sites More sharing options...
TonyT Posted November 24, 2020 Share Posted November 24, 2020 Go with the cables if you can it will be worth while having to save change batteries etc, possible interference etc. personally I think it’s better. run 8 core to each point back to the control panel, remember to mark each cable at the control panel. Link to comment Share on other sites More sharing options...
TonyT Posted November 24, 2020 Share Posted November 24, 2020 I use dual tech sensors combination of pir/microwave sensors where both sensors have to detect to activate a signal these are in one unit and require 1 cable Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now