markc Posted March 30, 2022 Share Posted March 30, 2022 @Nick Laslett I wouldn’t have any problem putting a timber pack under the sole plate (possible implications if it’s a fire wall). and nothing wrong with slitting and folding the flanges locally for ducts etc. Link to comment Share on other sites More sharing options...
Dreadnaught Posted March 30, 2022 Share Posted March 30, 2022 2 hours ago, Nick Laslett said: @nod, @Dreadnaught any help would be appreciated. I will happily defer to @nod and others for the answers. I haven't started my metal framing quite yet, hopefully after Easter. Link to comment Share on other sites More sharing options...
nod Posted March 30, 2022 Share Posted March 30, 2022 1 hour ago, Dreadnaught said: I will happily defer to @nod and others for the answers. I haven't started my metal framing quite yet, hopefully after Easter. Ask away Link to comment Share on other sites More sharing options...
Nick Laslett Posted March 30, 2022 Share Posted March 30, 2022 6 hours ago, nod said: Ask away My two questions are earlier in the thread. 1. My Wall height is 2750mm. Can I use a piece of 2”x3” under the u-track to raise it by 50mm and use 2700mm C studs? 2. I need to run 90mm MVHR ducting between rooms, can I make cuts in the deep u-track on the ceiling and bend over the metal to make these runs easier? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now