Jump to content

Picking which panels ?


canalsiderenovation

Recommended Posts

So, need to make a decision on which actual solar panels for our in roof system of 12 horizontal panels. It's either the JA Solar 310W LW Mono Percium All Black with MC4 or the JA Solar 320W Mono Percium LW Black Frame with MC4.
 
Aside from the watt, there is difference in the panel itself as the 320w has a white backsheet and the 310w is black.
 
Any advice on which I should choose. There is around a £50 difference with the 310w ones being more expensive so negligible.
Link to comment
Share on other sites

From the datasheets the panels look almost identical and only difference I can see is backsheet color and wattage.  They have same temperature co-efficient and anual degredation at least from what I saw, which are two other things to look at when comparing panels.  The color of the backsheet is purely aesthetic,

  • Thanks 1
Link to comment
Share on other sites

8 minutes ago, Dan F said:

From the datasheets the panels look almost identical and only difference I can see is backsheet color and wattage.  They have same temperature co-efficient and anual degredation at least from what I saw, which are two other things to look at when comparing panels.  The color of the backsheet is purely aesthetic,

 Thanks @Dan F it makes more sense I guess to go for the 320w then I guess. 

 

The quote is with a Growatt 3600 inverter and Solid 200 immersion controller.

Edited by canalsiderenovation
Link to comment
Share on other sites

1 minute ago, joe90 said:

I discounted PV from the start due to lack of FIT but that looks cheap (compared to a few years ago!).

 

We have had a variety of prices and I've been negotiating for a while on materials, spec etc and it started far higher. I've been back and to to various companies negotiating. We aren't going down FIT or MCS so our electrician/builder will be fitting so my priority has been trying to get the materials at a reasonable cost.

  • Thanks 1
Link to comment
Share on other sites

12 minutes ago, canalsiderenovation said:

We aren't going down FIT or MCS so our electrician/builder will be fitting so my priority has been trying to get the materials at a reasonable cost.

 

Do you not plan to export any excess production at any time of the year?  In order to get export payments under SEG (not FIT) my understanding is that you need an MCS certified install.

Link to comment
Share on other sites

23 minutes ago, Dan F said:

 

Do you not plan to export any excess production at any time of the year?  In order to get export payments under SEG (not FIT) my understanding is that you need an MCS certified install.

 

Nope. The MCS install cost wasn't worth the extra as we both work from home so are solely doing it for our use. In my case with various quotes it was more than double the cost for an MCS install, some quotes were triple. I know we need to add the fitting cost onto the material cost of the quote above but I can't see us ever getting back £3-£4k plus with SEG it would cost for the MCS install.

Link to comment
Share on other sites

39 minutes ago, canalsiderenovation said:

 

Nope. The MCS install cost wasn't worth the extra as we both work from home so are solely doing it for our use. In my case with various quotes it was more than double the cost for an MCS install, some quotes were triple. I know we need to add the fitting cost onto the material cost of the quote above but I can't see us ever getting back £3-£4k plus with SEG it would cost for the MCS install.

....so the rules and regs can work against the environment!

Link to comment
Share on other sites

Every now and then we do the odd house for a small builder 

Recently he’s built a group of four cottages and really pushed the boat out Natural stone Cedar cladding 

Solar panels His joinery company tackle most things 

But decided to bring in a specialist company for the solar Panels 

While we where boarding the loft space we could see and here them following a you tube guide to fitting 

  • Haha 1
Link to comment
Share on other sites

41 minutes ago, nod said:

Every now and then we do the odd house for a small builder 

Recently he’s built a group of four cottages and really pushed the boat out Natural stone Cedar cladding 

Solar panels His joinery company tackle most things 

But decided to bring in a specialist company for the solar Panels 

While we where boarding the loft space we could see and here them following a you tube guide to fitting 

 

I would prefer contractors to read / look at install instructions rather than wing it, which a lot do.  I once had some chippies install expensive cement cladding.  They decided on a 155mm lap although it should have been 180mm.  Cost me an extra £1,800 and some of the junctions looked crap.

  • Like 1
Link to comment
Share on other sites

10 minutes ago, Mr Punter said:

 

I would prefer contractors to read / look at install instructions rather than wing it, which a lot do.  I once had some chippies install expensive cement cladding.  They decided on a 155mm lap although it should have been 180mm.  Cost me an extra £1,800 and some of the junctions looked crap.

They had all the gear but no idea 

There first install Good job they had you tube to be a bit of hand holding 

Link to comment
Share on other sites

On 11/09/2020 at 19:31, Dan F said:

 

Well, the inverter is still connected to the grid isn't it, so aren't you still exporting excess but can't be paid for it?

If you're not going to get paid for it is it worth the cost of hooking up to the grid at all? I think it would put some folk off.

Link to comment
Share on other sites

24 minutes ago, Reiver said:

If you're not going to get paid for it is it worth the cost of hooking up to the grid at all? I think it would put some folk off.


You then end up buying expensive batteries and somehow split wiring the house to use battery for some non critical areas. That seems much more complex than having a standard build that has a (much cheaper) grid tied inverter. 

Link to comment
Share on other sites

28 minutes ago, PeterW said:


You then end up buying expensive batteries and somehow split wiring the house to use battery for some non critical areas. That seems much more complex than having a standard build that has a (much cheaper) grid tied inverter. 

 

And you need a generator for when you don't have enough PV to meet demand.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...