K rend scuffing

[Pocster]

My exterior was K rendered about a year ago . I’ve noticed a few scuffs and assumed it’s where I’ve hit the wall . I no longer think this . Not sure it shows up in the photos . Obviously I could re paint at a later date just surprised how soon it seems to be losing its colour 

[Onoff]

Needs to all come off and be redone imo. 

 

?

[Pocster]

9 minutes ago, Onoff said:

Needs to all come off and be redone imo. 

 

?

Should it lose its colour so quick though ?

Always thought k rend should last for years - not 1 year . That wall is on a sheltered side aswell .... ?

Edited August 7, 2020 by pocster

[Mr Punter]

Most of the through colour render I have seen does this.

 

Here is some in Brighton 7 years old

 

 

Here it is newly done

 

 

[Pocster]

2 minutes ago, Mr Punter said:

Most of the through colour render I have seen does this.

 

Here is some in Brighton 7 years old

 

 

Here it is newly done

 

 

Ouch ! . Mines only 1 year old ! . Just repaint then with the appropriate silicon breathable paint ??

[Mr Punter]

The brickwork on the right looks OK though, so you could rebuild in brick.

[A_L]

The worst scuffing on the tower blocks seems to correspond with possible thermal bridges and little around boiler vents (warm-spots).

[nod]

Contact K Rend This is exactly what your guarantee is for 

 

The k Paint is good You have to do the full panel and also loose the silicone sparkle 

[Pocster]

1 hour ago, nod said:

Contact K Rend This is exactly what your guarantee is for 

 

The k Paint is good You have to do the full panel and also loose the silicone sparkle 

So I can simply over paint it with the appropriate paint? . Do I need to prep the surface?

[nod]

We’ve done a few that have just wanted to change the colour

we normally spray ten days before with an anti algae 

Let the rain to the rest 

 

[Thedreamer]

Is K rend difficult to be applied correctly? Just an observation but seems to be a few posts on here about it going wrong.