Jump to content

Floor screed


A-Com

Recommended Posts

Hi,

i am trying to determine a method to accurately measure the depth of applied floor screed to a new build.

i did not apply it, but it appears to be thin in certain spots i.e. not to the required depth.

 

 

Link to comment
Share on other sites

1 hour ago, A-Com said:

Hi,

i am trying to determine a method to accurately measure the depth of applied floor screed to a new build.

i did not apply it, but it appears to be thin in certain spots i.e. not to the required depth.

 

 

If you are going for a sand and cement it should be 75 mil average 

20 ton will cover 150m2

Pumped concrete will be 50 mil

and metred So you will pay for what you use 

Link to comment
Share on other sites

If it's down already then measure from whatever was declared as the datum for the floor if it's your project.

 

Or is it somewhere you've bought already done, that is now showing a more serious issue?

 

If not containing underfloor pipes, you could drill it and see where you break through, assuming it's over insulation it will go soft and you can gauge the point of breakthrough as the depth.

 

Need a bit more info on the make up and what you're trying to determine I think.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...