Pete Posted March 20, 2020 Share Posted March 20, 2020 Can people please tell me if the end of the pipe that goes into the 110mm pipe be solvent welded or is it just push fit? TIA Link to comment Share on other sites More sharing options...
Temp Posted March 20, 2020 Share Posted March 20, 2020 Call/email them? I don't know but you could try sticking a bit of solvent weld pipe to the bend (eg not the joint area) and leave over night if that sticks well the joint should be ok. Link to comment Share on other sites More sharing options...
Pete Posted March 25, 2020 Author Share Posted March 25, 2020 Just to close this thread, the connector from the Geberit 90 degree bend to 110mm pipe is only push-fit and not solvent weld. (Thanks @Temp, sometimes the simple things are overlooked!) Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now