nickw Posted January 19, 2020 Share Posted January 19, 2020 Does anyone know if I can get a y junction that is different to the normal offset 2 pipes into one, I'm trying to source 1 y junction that is shaped more of a u shape so 2 x 110mm inlets into 1x 110mm outlet but with the pipes parallel and not set at the normal angles. I have seen them before on the web but I don't think they were UK. Shape wise like this https://www.ebay.com/itm/2-5-Inlet-Dual-3-5-Out-Twin-Exhaust-Tip-With-One-Clamp-Stainless-Steel-/173766186547 Link to comment Share on other sites More sharing options...
willbish Posted January 20, 2020 Share Posted January 20, 2020 No need for a specific fitting. Just use a standard Y junction and then use a 45 to bring it back parallel with the input. Insert appropriate length of pipe between Y and 45 for required offset. 1 Link to comment Share on other sites More sharing options...
JFDIY Posted January 20, 2020 Share Posted January 20, 2020 As above, but if you must have a Y branch, Osma/wavin 4d492 and cap the redundant leg. Travis Perkins usually discount osma massively so don't believe the list price. Link to comment Share on other sites More sharing options...
Carrerahill Posted January 20, 2020 Share Posted January 20, 2020 10 hours ago, nickw said: Does anyone know if I can get a y junction that is different to the normal offset 2 pipes into one, I'm trying to source 1 y junction that is shaped more of a u shape so 2 x 110mm inlets into 1x 110mm outlet but with the pipes parallel and not set at the normal angles. I have seen them before on the web but I don't think they were UK. Shape wise like this https://www.ebay.com/itm/2-5-Inlet-Dual-3-5-Out-Twin-Exhaust-Tip-With-One-Clamp-Stainless-Steel-/173766186547 You can get that exact "U" thing as I have seen it in my merchants, I would download the Osma and Marley and FloPlast catalogues and have a look. I had a look through an MK catalogue the other day and found all the bits I needed after being told "No, no one does anything like that". Link to comment Share on other sites More sharing options...
nickw Posted January 20, 2020 Author Share Posted January 20, 2020 thank you guys Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now