Jump to content

SDS Chuck size converter


Pocster

Recommended Posts

Not sure this exists

But I’ve got this nice 18mm 800mm drill bit - but the sds fitting is to large for any of my drills ( apart from my Hilti but that’s just a breaker ) . Is there some converter that I can use so it fits a conventional hammer drill ??

66D17669-C040-4DD5-B645-0BBFA7D059E5.jpeg

Link to comment
Share on other sites

If the dia of the shank is 18mm then its an SDS max. SDS and SDS plus use a 10mm dia and they are not compatible. You can buy adapters for the opposite way to what you want. You could cut the SDS part off and have some one machine the diameter to fit a normal chuck but then there is no going back. 

  • Sad 1
Link to comment
Share on other sites

46 minutes ago, SiBee said:

If the dia of the shank is 18mm then its an SDS max. SDS and SDS plus use a 10mm dia and they are not compatible. You can buy adapters for the opposite way to what you want. You could cut the SDS part off and have some one machine the diameter to fit a normal chuck but then there is no going back. 

Erm ! So no sds max to sds converter ? ?

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...