Pocster Posted January 19, 2021 Author Share Posted January 19, 2021 4 minutes ago, Onoff said: Is the pan Geberit? Yep . These are the bolt end attachments. There’s no way you can tighten with an Allen key Link to comment Share on other sites More sharing options...
Pocster Posted January 19, 2021 Author Share Posted January 19, 2021 (edited) Ok ! Phone call to geberit ! Apparently there’s an embedded grub screw in the fitting which is embedded in the pan ! I shall now go and look for it !! Edited January 19, 2021 by pocster Link to comment Share on other sites More sharing options...
Pocster Posted January 19, 2021 Author Share Posted January 19, 2021 Ahhhh there it is ffs !! 2 Link to comment Share on other sites More sharing options...
Onoff Posted January 19, 2021 Share Posted January 19, 2021 You want to be sticking that pan to the tiled wall with clear CT1 then leaving for 36 hours before planting your ar$e on it. Put the pan on, mask the wall then back off and pump in the good stuff. Tighten up and baby wipe the excess. Remove the tape. Go over with a silicone of your choice. Link to comment Share on other sites More sharing options...
Pocster Posted January 19, 2021 Author Share Posted January 19, 2021 Just now, Onoff said: You want to be sticking that pan to the tiled wall with clear CT1 then leaving for 36 hours before planting your ar$e on it. Put the pan on, mask the wall then back off and pump in the good stuff. Tighten up and baby wipe the excess. Remove the tape. Go over with a silicone of your choice. Going to do it all dry first . Now need to read ( well look at pics ) for cutting the waste and supply pipes to the correct length . Plenty of opportunities for fs still ? Link to comment Share on other sites More sharing options...
Pocster Posted January 19, 2021 Author Share Posted January 19, 2021 (edited) Assuming if I fit it all dry I flush it and make sure no leaks . Then take it off ,ct1 , clean it up , leave it for 3 days Edited January 19, 2021 by pocster Link to comment Share on other sites More sharing options...
Pocster Posted January 19, 2021 Author Share Posted January 19, 2021 Ok ; seems simple enough . Measure distance of pipe off wall . Measure distance of pipe off wc . Cut that difference off the end + 3mm Link to comment Share on other sites More sharing options...
markc Posted January 19, 2021 Share Posted January 19, 2021 Plenty of lube on the flush pipe before you push the pan on, ive had the rubber gaskets/seals slide down the pipe instead of going into the pan. one was so persistent i had to wrap tape around the pipe behind the seal to stop it popping over the pipe end and sliding back. 1 Link to comment Share on other sites More sharing options...
Onoff Posted January 19, 2021 Share Posted January 19, 2021 10 minutes ago, pocster said: Ok ; seems simple enough . Measure distance of pipe off wall . Measure distance of pipe off wc . Cut that difference off the end + 3mm Been there, done that, plenty o' lube and remove the burrs. 1 Link to comment Share on other sites More sharing options...
Onoff Posted January 19, 2021 Share Posted January 19, 2021 31 minutes ago, pocster said: Assuming if I fit it all dry I flush it and make sure no leaks . Then take it off ,ct1 , clean it up , leave it for 3 days You going to replace those two butchered tiles? ? Link to comment Share on other sites More sharing options...
Pocster Posted January 19, 2021 Author Share Posted January 19, 2021 5 minutes ago, Onoff said: You going to replace those two butchered tiles? ? Think of an answer that contains 2 words . The second word is “ off “ Link to comment Share on other sites More sharing options...
Pocster Posted January 19, 2021 Author Share Posted January 19, 2021 10 minutes ago, Onoff said: Been there, done that, plenty o' lube and remove the burrs. Usually use fairy . Be he seems to have gone missing ! Link to comment Share on other sites More sharing options...
Onoff Posted January 19, 2021 Share Posted January 19, 2021 17 minutes ago, pocster said: Think of an answer that contains 2 words . The second word is “ off “ First word "prisethem"? Link to comment Share on other sites More sharing options...
Pocster Posted January 19, 2021 Author Share Posted January 19, 2021 Christ it’s a fight ! Fittings on wall first . Then tried fittings on pan first ( at least you can just about see pipe alignment) . It’s still fighting me though !! Link to comment Share on other sites More sharing options...
ToughButterCup Posted January 19, 2021 Share Posted January 19, 2021 Its a bit of a struggle on your own: are you using the Geberit cardboard support frame so you can just slide the pan up to the fittings .... ? Link to comment Share on other sites More sharing options...
Pocster Posted January 19, 2021 Author Share Posted January 19, 2021 6 minutes ago, ToughButterCup said: Its a bit of a struggle on your own: are you using the Geberit cardboard support frame so you can just slide the pan up to the fittings .... ? Erm no ? Don’t remember ever seeing such a thing Link to comment Share on other sites More sharing options...
ToughButterCup Posted January 19, 2021 Share Posted January 19, 2021 For both mine, the bowl came in cardboard packaging: you take the top off the package and the bowl is sitting on a cardboard framework....... Maybe yours is a different model. Mine's Tuma Classic. Link to comment Share on other sites More sharing options...
Onoff Posted January 19, 2021 Share Posted January 19, 2021 Can't remember how I got mine on! Got a feeling I used a trolley jack. I know I had the pipes on the pan then fed them into the wall: Link to comment Share on other sites More sharing options...
ToughButterCup Posted January 19, 2021 Share Posted January 19, 2021 2 Link to comment Share on other sites More sharing options...
Onoff Posted January 19, 2021 Share Posted January 19, 2021 46 minutes ago, ToughButterCup said: Looks like the Noo Noo! 1 Link to comment Share on other sites More sharing options...
Mr Punter Posted January 19, 2021 Share Posted January 19, 2021 54 minutes ago, ToughButterCup said: Are those for some kind of basin? Got a picture of it all finished? Be nice to see an "After" photo on this thread! Link to comment Share on other sites More sharing options...
Onoff Posted January 19, 2021 Share Posted January 19, 2021 4 minutes ago, Mr Punter said: Are those for some kind of basin? Got a picture of it all finished? Be nice to see an "After" photo on this thread! His 'n hers Gary Glitters. 1 Link to comment Share on other sites More sharing options...
Mr Punter Posted January 19, 2021 Share Posted January 19, 2021 12 minutes ago, Onoff said: His 'n hers Gary Glitters. That did cross my mind. Could be a Teutonic thing. Link to comment Share on other sites More sharing options...
Gone West Posted January 19, 2021 Share Posted January 19, 2021 5 hours ago, pocster said: Now the drawer won’t clear the trap !! Any chance with a shallow bottle trap? Link to comment Share on other sites More sharing options...
Pocster Posted January 19, 2021 Author Share Posted January 19, 2021 1 hour ago, PeterStarck said: Any chance with a shallow bottle trap? Don’t know ! How shallow are they . I did like the telescopic one - makes life easier Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now