Recommended Posts

My distribution box for the MVHR  ( sometimes called spigot box or manifold) will sit beneath a flat roof , but above a ceiling.

The roof build up from top down is;

  • Alvitra Avalon over
  • 270mm of insulation on 
  • some super expensive vapour stuff - forgotten the name - the price was so traumatic
  • 22mm OSB3
  • POSIs above the ceiling build up which is 
  • Vapour control layer 
  • 25mm insulation
  • 12 mm plasterboard
  • 2mm plaster skim.

 

There's enough space for  spigot boxes to  sit comfortably under the POSIs. That means they are outside the heated envelope. (just)

 

The supplier says not to worry : but they would wouldn't they? Everyone has that problem, said the rep,

 

What do you think?

 

Share this post


Link to post
Share on other sites

I think, do you need the 25mm insulation? Is it going to be make a significant different to target Uvalue.

 

The supplier is probably right, the temperature in the void between the posi's will be very close to room temp. Chance of condensation very minimal I would have thought.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now