Jump to content

Search the Community

Showing results for tags 'rooflights'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Content Type


Forums

  • BuildHub Guide: Information about the site : Introduce Yourself
    • About BuildHub.org.uk
    • Introduce Yourself
  • Build Design, Planning, Finance and Legal
    • Building Plots, Land & Renovation Properties
    • Design & Architecture
    • Funding, Finance & Tax
    • Insurance, Legal and Warranties
  • House Construction & Structural Issues
    • House Construction
    • Conversions & Extensions
    • Roofing & Lofts
    • Structural Works, Foundations & Demolition
    • Insulation & Ventilation
    • Landscaping & Outdoor Buildings
    • Damp & Infestation
  • Building Trades
    • Plumbing & Heating
    • Bricklaying, Plastering, Concrete, Blocks & Rendering
    • Joinery, Windows & Doors
    • Floors & Flooring
    • Electrics, Lighting & Home Security
    • Decorating & Tiling
    • Kitchens & Bathrooms
    • Building Materials
  • Environmental, Alternative & Green Building Methods
    • Designing Energy Efficient & Sustainable Homes
    • Renewable Home Energy Generation
    • Research & Information Sources
    • Environmental Building Politics
    • Boffin's Corner
  • Self Build & DIY: General
    • General Self Build & DIY Discussion
    • Housing Politics
    • Property TV Programmes
    • Tools & Equipment
  • Self Build Regional Groups
    • UK
    • Europe

Calendars

  • Community Calendar

Blogs

  • Salamander Cottage
  • The House At Mill Orchard
  • An Orkney Build (in ICF)
  • The House at the Bottom of the Garden
  • Hawthorn House
  • Rose Lane re-build
  • East Kent Self Build
  • Wee Hoose on the Croft
  • God is in the Details
  • Tennentslager
  • Kentish RenoExtension
  • Scooby Cottage renovation.
  • The Seasalter Sharp House
  • sussexlogs
  • Sips and stones may break my bones...
  • Our Journey North of the Border
  • Construction in Cornwall
  • The Fun Irish (House)
  • A house! A house! My kingdom for a house!
  • South Devon Self Build
  • Lucy Murray
  • Coffee Towers
  • caliwag
  • caliwag
  • Blackmore House
  • A woodland house
  • Druim nan Darach
  • Escarpment to the countryside
  • Recoveringbuilder
  • Netherwood lakes
  • Kingseat
  • Mr and Mrs Triassics New Home
  • Yaffles
  • Wedding Cake Re-build
  • Clancutt Lodge
  • Self-Build in Shropshire
  • South coast ICF build
  • 5 (2 adults, 3 dogs) go building in Dorset
  • Hillcroft
  • Self Build NE Scotland
  • Timber Portal Frame - but stick built
  • Self Building two in North Wiltshire
  • 1970s Chalet-style house renovation
  • Under the Chestnut Tree
  • The Larch House
  • Building in a woodland on the Isle of Wight
  • Back on the self-build waggon...
  • Gardening in the Lockdown
  • The BuildHub Gardening Blog
  • West Sussex Forever Home
  • Testing
  • Canalside Bungalow Renovation
  • Holywood Passive ICF Build
  • Finchampstead Passivhaus
  • Albaston self-build
  • Little Stud Barn
  • South East Cornwall Low Energy build
  • Scottish SIPS build
  • Gus Potter
  • Garden Escape
  • error
  • ASHP, MVHR, PV and EV combo
  • The Windy Roost
  • Wind! Yes I know but....
  • Big Bungalow Build!
  • A Rainfuel project
  • Making a cheap electrical energy meter
  • Rainwater Harvesting
  • Lessons from the road...
  • Dragons in the North
  • Surrey self build
  • The Old Cow Shed
  • Major extension and eco renovation in Leicestershire
  • Canski
  • Canski
  • Deep refurb and extension
  • Bog Lane Former Water Works
  • Renovation of Ellesmere Bungalow.
  • Energy

Find results in...

Find results that contain...


Date Created

  • Start

    End


Last Updated

  • Start

    End


Filter by number of...

Joined

  • Start

    End


Group


About Me


Location

Found 5 results

  1. I’m sourcing 3 flat roof lights for the ground floor of our self build extension. One of them is on a fire exit route from the first floor so have been informed by our architect that we need glazing for this window with a 30 minute fire safety rating. Does anyone have any recommended suppliers? It will be 2100 x 800 in size, fixed pane. many thanks in advance!
  2. We have a number of flat rooflights (electrically operated) in a commercial premises as per the attached image. Can anyone suggest a suitable cost effective flyscreen for a 2000x1000mm opening. We would need a product that is openable to allow access for cleaning. I have approached the rooflight supplier who was unable to offer any assistance. If a system could be suggested to have the flyscreen installed on externally that would be ideal. Any assistance would be appreciated.
  3. Weebles

    We have a leak

    Thought I'd add this to the blog but would be very grateful for some advice. Some construction background: MBC timber frame, flat roof, pumped insulation in roof void. Make up of roof is Sarnafil (hot welded) laid on a felt base, on top of 22mm OSB roof (with a slope), on top of 22mm OSB roof deck (flat - slope provided by battens to create the fall), then 400mm pumped insulation between the roof joists, air tight membrane, battens, 12mm plasterboard and skim. Roof lights on the flat roof (including a lovely round one, subject of another blog post). Yesterday we had some drips coming through the finished ceiling, about 700mm from the edge of our circular rooflight. We cut away some plasterboard to see what is going on. Plasterboard soaking wet, batten soaking wet and looks like the insulation is soaking wet. There is some water damage closer to the rooflight too, visible in the photo, but we started our cut at the plasterboard edge which is where the water started seeping through - the low point I guess. Have contacted roofing supplier and rooflight supplier (both of whom fitted their product). What shall I do next? I can't help feeling that without detecting the source of the leak neither supplier is going to help us. Any thoughts? Cut away our ceiling until we find the edge of the problem? (as we get nearer to the rooflight bit of course we are 7m off the floor ☹️)
  4. Our designed house has 5 rooflights. 3 rectangular, 1 small square one in a bathroom and a large circular one above a two storey entrance hall, making it, I guess, the "feature" of the house. Our plot is surrounded by trees on two sides so getting light into rooms is an issue, hence the rooflights. Here is our rooflight story (part 1) We got some quotes in from companies and decided on our roof light manufacturer based on price and reasonable service. MBC agreed to make the upstands as part of our contract. The rooflight company quoted for the upstands also. We opted to let MBC do the upstands as they were already paid for effectively. MBC couldn't make the circular upstand so designed an octagonal one. We thought that would be OK, and that we would get an octagonal rooflight or make a circular finish inside later. We didn't mention the octagonal upstand to the roof light company. Not deliberate. Just didn't think anything of it. BIG MISTAKE. MBC put the frame up. They did the upstands whilst we were on holiday. The upstand finish wasn't great. Our roofers came on site and said that the finish would need to be better, otherwise the roof membrane wouldn't sit well over the upstands. We decided to sort them out ourselves so didn't approach MBC. No complaints about MBC on this issue as it was our decision not to ask them. Hubby had acquired a multi-tool and was keen to use it. You can see on this image that the edge of the upstand is not vertical as there is a bit of board plus the blue membrane sitting proud of the top edge. So we ripped the outer board off, cut new bits to size and then planed and sanded for a level smooth finish. We then filled all the gaps so the roof membrane could fit nicely. So far so good. Then mid August the roof light people come out for the survey (paid for by us, having at this point put down a 50% deposit of the total expected cost on 26 July). They like to measure the actual upstands in situ to make sure the rooflights will fit. Makes sense. Whilst on site, the installation manager notes that the octagonal window will likely be a little more expensive and it will be included on a revised, final quote which adjusts for the as-measured dimensions. He also informs us that the installation fee does not include lifting the rooflights off the lorry, lifting the roof lights on to the roof and that there needs to be additional health and safety such as a roof man anchor set. We ask him to get the revised quote to us asap as the roofers are back on site to finish roofing over the upstands. Two weeks elapse. We chase the quote. The roofers finish. We chase the quote again. The quote arrives. The cost of the octagonal rooflight is 100% more than the cost of the circular one. Mmm, that's a bit more than a "little bit more expensive". We lose sleep. We speak to the roof light company and say that is unacceptable and what can they do about it. They suggest adjusting the upstand. We inform them that this solution would have been easy had they told us 2 days earlier but now our roofers have roofed it over and are off site so it can't easily be changed. If only they hadn't taken more than 2 weeks to update their quote..... The roof light company decides that they can come up with a design solution so a circular rooflight will fit on an octagonal upstand. We ask to see it. Several weeks pass. I chase them. The lady on the phone is rude. I explain our situation, again. They send the drawing. We approve them. No choice now. We are 50% paid up. Let's hope this works. We have to pay the remaining 50% for them to even start manufacturing them and get us in the delivery queue. We do that on 10th October. 2-3 weeks lead time apparently. All goes quiet. We chase them. A delivery date is arranged for next week (13th Nov). We contact their contract lift suggestion who visits to quote for the crane needed. We had been hoping to put these in with our other windows (sharing the crane) at the end of September. The delays have made it impossible to do that. This comes in at £1350 plus VAT. We are horrified. Unforeseen costs. Am trying to be pragmatic but I am hating these rooflights more and more and we haven't even got them yet. This has been our worst experience so far with a supplier. Really disappointing. Couldn't possibly recommend them. And there is rain forecast all weekend so those bloody holes in our roof are going to let more water into our house (the are covered in plastic but it always finds a way in). Part 2 (next week, after they are fitted) - are they worth it? (gosh I hope so)
  5. I am at the stage where i need to start looking at ordering the rooflights, I need 6 in total and as 4 of them are in bedrooms i need at least 2 of them to be top hung, my question is does anyone actually use the top hung ability so you can stand in them, or could you have got away with center pivots which are cheaper? the top of my windows are about 1.8m so a top hung would mean i could stand in them quite happily but are they worth the extra cost? any opinions welcome TIA Ed
×
×
  • Create New...