Jump to content

Search the Community

Showing results for tags 'heat recovery'.

  • Search By Tags

    Type tags separated by commas.
  • Search By Author

Content Type


Forums

  • BuildHub Guide: Information about the site : Introduce Yourself
    • About BuildHub.org.uk
    • Introduce Yourself
  • Build Design, Planning, Finance and Legal
    • Building Plots, Land & Renovation Properties
    • Design & Architecture
    • Funding, Finance & Tax
    • Insurance, Legal and Warranties
  • House Construction & Structural Issues
    • House Construction
    • Conversions & Extensions
    • Roofing & Lofts
    • Structural Works, Foundations & Demolition
    • Insulation & Ventilation
    • Landscaping & Outdoor Buildings
    • Damp & Infestation
  • Building Trades
    • Plumbing & Heating
    • Bricklaying, Plastering, Concrete, Blocks & Rendering
    • Joinery, Windows & Doors
    • Floors & Flooring
    • Electrics, Lighting & Home Security
    • Decorating & Tiling
    • Kitchens & Bathrooms
    • Building Materials
  • Environmental, Alternative & Green Building Methods
    • Designing Energy Efficient & Sustainable Homes
    • Renewable Home Energy Generation
    • Research & Information Sources
    • Environmental Building Politics
    • Boffin's Corner
  • Self Build & DIY: General
    • General Self Build & DIY Discussion
    • Housing Politics
    • Property TV Programmes
    • Tools & Equipment
  • Self Build Regional Groups
    • UK
    • Europe

Calendars

  • Community Calendar

Blogs

  • Salamander Cottage
  • The House At Mill Orchard
  • An Orkney Build (in ICF)
  • The House at the Bottom of the Garden
  • Hawthorn House
  • Rose Lane re-build
  • East Kent Self Build
  • Wee Hoose on the Croft
  • God is in the Details
  • Tennentslager
  • Kentish RenoExtension
  • Scooby Cottage renovation.
  • The Seasalter Sharp House
  • sussexlogs
  • Sips and stones may break my bones...
  • Our Journey North of the Border
  • Construction in Cornwall
  • The Fun Irish (House)
  • A house! A house! My kingdom for a house!
  • South Devon Self Build
  • Lucy Murray
  • Coffee Towers
  • caliwag
  • caliwag
  • Blackmore House
  • A woodland house
  • Druim nan Darach
  • Escarpment to the countryside
  • Recoveringbuilder
  • Netherwood lakes
  • Kingseat
  • Mr and Mrs Triassics New Home
  • Yaffles
  • Wedding Cake Re-build
  • Clancutt Lodge
  • Self-Build in Shropshire
  • South coast ICF build
  • 5 (2 adults, 3 dogs) go building in Dorset
  • Hillcroft
  • Self Build NE Scotland
  • Timber Portal Frame - but stick built
  • Self Building two in North Wiltshire
  • 1970s Chalet-style house renovation
  • Under the Chestnut Tree
  • The Larch House
  • Building in a woodland on the Isle of Wight
  • Back on the self-build waggon...
  • Gardening in the Lockdown
  • The BuildHub Gardening Blog
  • West Sussex Forever Home
  • Testing
  • Canalside Bungalow Renovation
  • Holywood Passive ICF Build
  • Finchampstead Passivhaus
  • Albaston self-build
  • Little Stud Barn
  • South East Cornwall Low Energy build
  • Scottish SIPS build
  • Gus Potter
  • Garden Escape
  • error
  • ASHP, MVHR, PV and EV combo
  • The Windy Roost
  • Wind! Yes I know but....
  • Big Bungalow Build!
  • A Rainfuel project
  • Making a cheap electrical energy meter
  • Rainwater Harvesting
  • Lessons from the road...
  • Dragons in the North
  • Surrey self build
  • The Old Cow Shed
  • Major extension and eco renovation in Leicestershire
  • Canski
  • Canski
  • Deep refurb and extension
  • Bog Lane Former Water Works
  • Renovation of Ellesmere Bungalow.
  • Energy

Find results in...

Find results that contain...


Date Created

  • Start

    End


Last Updated

  • Start

    End


Filter by number of...

Joined

  • Start

    End


Group


About Me


Location

Found 6 results

  1. Hi guys, Wondering if anyone with experience of MVHR in new builds can advise me on a few things. Essentially I'm working on my self-build and I'm just wanting to make sure I'm correct about some of the building regulations regarding the installation of MVHR. So the house will have the following dimensions: Basement area - 210m2 (504m3) Ground floor - 210m2 (504m3) First floor - 135m2 (324m3) Second floor - 135m2 (250m3) Total 690m2 (1588m3) Some additional info is that there are potentially 7 bedrooms, 1 kitchen, 1 utility and 7 bathrooms. The number of occupants on a daily basis will be 4, however we will likely have up to 10 people total staying in the house at any one time. Now my questions were regarding the size of the MVHR I need to spec. I understand that according to building regs, the rate of exchange should be a minimum of 0.3l/s/m2, which based on my 690m2 of space gives me a system that can handle 207l/s (745m3/hr). Firstly, can anyone confirm that I have understood this properly? And then my second question is that whilst we do have a large space, the number of inhabitants most of the time won't be particularly high and some of the spaces, eg loft and basement space, won't be used on a daily basis - so would I be able to get away with using a system that just passes building regs (eg. one that can cope with say 800m3/hr - Daikin Air Conditioning Ducted Heat Exchanger VAM800J; or Lg Air Conditioning Eco V Heat Recovery Ventilator LZ-H080GBA5; or potentially a couple of the ), or would I need a system with a much higher potential capacity (eg ~1000-1500m3/hr - eg the LG heat recovery ventilator LZ-H150GBA5)? Was hoping those of you that own MHVR's and have experience using them can help me advise me as to whether Building regs requirements are over the top and in reality the system wouldn't need to work anywhere near as hard to meet our needs. Also if anyone has any suggestions with any particular brand or heat exchanger then please feel free to recommend. I've explored the options from Titon and Zehnder but it seems I would need two of their systems to cope with the floor space - putting us at ~£4.5k for the systems; whilst the ones I've suggested above are approximately half of that so whilst they have a slightly lower efficiency (80%) I figured the extra for the Zehnders wouldn't be worth the time it would take to recover the extra £2-2.5k. Opinions welcome though! :) Thank you in advance
  2. Sometimes questions are raised as to whether it's worth increasing insulation levels and often there seems to be confusion as to what the "ideal" level of insulation is, or even what a "good" or "reasonable" level of insulation might be. I'm not sure whether or not the non-linear impact of improving insulation, in terms of the effect on the heating requirement, and hence running cost during cold weather, is widely understood. I've heard comments like "it's not worth improving the insulation from 0.16 W/m2.K to 0.12 W/m2.K because it would be 30% more expensive and only reduce the heat loss by 25%". Most of the time this is incorrect, because homes have heat sources all year around, from the occupants, incidental heating from appliances, solar gain and even pets (a medium sized dog is probably a four-legged 40 - 50W heater). So, I thought a really simple example might help some gain a better understanding of this non-linearity, and illustrate better why some are so evangelical about trying to improve insulation levels (and reduce ventilation heat loss, too, but I'll get to that another time). Let's build a pretend house, that for simplicity has no doors or windows and is a rectangular single storey box with a flat roof. For simplicity we'll assume it's on raised piles, with an air space underneath, just so we can use the same insulation level on all six sides and to make the sums simple. All I'm doing here is making a comparison, so this is a valid way of illustrating this effect. In our rectangular box house we have an average of 100W of incidental heating, coming from things like internet kit, a PC, a cordless phone base station, a TV, a phone charger, a few lights and a handful of intermittently used kitchen appliances. This is a pretty low figure - I struggle to keep our house background load below about 200W, without any lights on. The box houses two adults, giving out around 80 - 100W each and a dog, so lets say there is 220 W of heating coming from the occupants. The box also has a heating system that can deliver whatever power is needed to maintain a temperature of 20 deg C inside, and its night time, so there's no solar heating of the walls. Outside it's 5 deg C, a chilly winters night. This rectangular box is 10m long x 10m wide x 2.5m high inside, so has a total wall, floor and roof area of 300m2 and an internal floor area of 100m2, so fairly average in size (a bit bigger than our current 3 bed bungalow). So, we have a temperature difference between the inside and outside of 15 deg C (20 deg C - 5 deg C), an internal surface area of 300m2 and a constant incidental heating level of 320 W (220 W from two adults and dog, 100 W from electrical appliances and lights). First, lets see how much heat we need to put into this box from the heating system, if we have U values for the walls, floor and roof of 0.2 W/m2.K (K is degrees Kelvin, the same units as degrees Centigrade when only temperature difference is being compared): The total heat loss power, in Watts, can be calculated from the U value, the area and the temperature difference, so for this first example we get 300m2 area x 15 deg C temperature difference x 0.2 W/m2.K U value = 900 W. There is 320 W of heat coming from the occupants etc, so the heating system would need to deliver 900 - 320 = 580 W in order to keep the house at 20 deg C under these conditions. If this were by direct electric heating, then the heating cost would be about £2.09 per 24 hours. Next, let's see how much heat we need to put into this box from the heating system, if we have U values for the walls, floor and roof of 0.1 W/m2.K , in other words, we've made the insulation twice as "good", so might think we've halved the heating cost: The total heat loss power is now 300m2 x 15 deg C temperature difference x 0.1 W/m2.K U value = 450 W. This is what we'd expect, double the insulation effectiveness and halve the heat loss. However, when we now take away the incidental heat gain from the occupants, etc, of 320 W, the heating system needs to deliver 450 - 320 = 130 W in order to keep the house at 20 deg C under these conditions. If this were by direct electric heating, then the cost would be about £0.47 per 24 hours. So, by doubling the insulation level we've decreased the heating cost by about 78%, not the 50% that might have been expected. This is a very simplistic example, but it does illustrate why doubling up in insulation can give a far greater benefit than might be expected. It also shows why, when you improve the level of insulation you can reduce the heating requirement down to such a low level that for a lot of the time you don't need any heating. In that last example, turning on a few extra lights could heat this imaginary box home to a comfortable temperature on a cold night, whereas with only half the insulation it needs something that delivers 446% more heat.
  3. Hi, Has anyone installed a heat recovery unit for the shower / wet room? Just wondered if it's worth the effort / risk of failure vs marginal waste heat recovery? I was looking at the Passive House component database and they had a section on it, this one caught my eye as it was the best performing (just listed as an example only): http://www.showersave.com/qb1-range/ I might look at including something similar in my build, a horizontal one for the wet room and the vertical one for the ensuite shower. Just curious what people's thoughts are on these generally?
  4. Hi All - i think the filters on my mvhr unit need changing. I’ve just read the manual and it says they should be replaced every 12 months but I’ve only been in my new home 5 months and the machine sounds like it’s having to work quite hard. It’s gotten much noisier. My sustem is Vent Axia Lo Carbon Sentinel Kinetic V MVHR system. I tried to hoover the current filters this evening but it’s a really tough task with little success. Does anyone one know where I can buy replacement filters from for cheap?! I’ve looked online and they all seem really pricey. If you have to change them regularly then it’s really going to add up! Any advice would be really helpful. Also, I’ve seen online that there’s different grades of filter quality. Can you really tell the difference? Thanks
  5. Hi, I have installed a Villavent mhvr system in my new build a few years back and it’s been running fine. I never got my final ticket, due to a lack of funds and had to just move in. I now desperately need my final ticket , so I can try to claim vat back. Do any of you clever people know the cheapest, easiest way for me to get a commissioning certificate passed on my system for building control. Im in Conwy, N.Wales. Appreciate and look forward to any help. Thanks Paul
  6. Hi. I am a home ventilation specialist and work for BPC ventilation that are leading designers and suppliers of home ventilation and heat recovery systems to builders and self builders throughout The UK, Ireland and most other worldwide locations I will try to answer any questions and explain the facts from the myths Gary
×
×
  • Create New...