Jump to content

Leaderboard

Popular Content

Showing content with the highest reputation on 09/27/16 in all areas

  1. For any one doing some outdoor woodwork, Screwfix are selling-off some of their Ultra screws at 70% off or more. Bought a couple of boxes but I'll probably be dead before I finish off the 90mm ones.
    2 points
  2. The use of Reuters, Megabad, Skybad and Heizman24 for the import of big ticket sanitaryware at much lower prices have been discussed in the plumbing section. I have just come across a German electrical store offering around 200,000 items, in English, priced in sterling. Delivery costs start at abouit £10.80 (12.50 euro). So for those of us thinking of buying Gira, Hager, Jung, Busch-Jaeger, Scneider switches, sockets etc, might want to take a look. www.eibmarkt.com (Note I have used Google translate on German sites before, but this is the first large electrical shopping site I have come across which is in English, with commodity pricing and low delivery costs.)
    2 points
  3. Hope the mods won't mind me posting this. I just wanted to pass on the details of a really good printer I found off Ebay and have been using to print my A1 plans. His name is David and his email is graphicsmaster@zoho.com His prices were better than Staples, local printers and all others I contacted off Ebay and he has been very professional with Paypal invoices and sending out all my plans promptly. Hope he can help out others Vijay
    1 point
  4. Time seems to be flying past with not enough progress to show for it. Anyway, a brief update. I got my 8ft wide triple glazed door (all 240kg of it) installed singlehandedly, showing just what you can do with a bit of patience and some levers, packers, and a bottle jack. Perhaps the reason progress is slowing down is that I find myself standing admiring the view out to the loch too often. Nearing the end of the chipboard flooring installation, I discovered maybe the first properly silly mistake I have made so far- the long edge of the boards are not supported and this is giving a slight creak, all along the front of the house. Of course they are glued and screwed down so they are nto coming up again. I will have to go in from underneath and fit battens to stiffen everything up. What a pain. At least on the back wall of the house I was aware of the problem and have added battens *before* laying the chipboard. The drainage run is now done, This involves five different penetrations through the floor buildup: kitchen, utility, basin, WC, shower. The kitchen can get away with a single drain point because the different appliances will connect up somewhere behind, within, or below the kitchen units. As luck would have it, the main hookup point where everything comes together is just underneath the eventual position of the WC, and this is where the ground level is highest, leaving me with some very unergonomic working conditions. Fortunately I was able to do the bulk of the work from above, before laying the final pieces of flooring. The other progress has been on insulation. A few weeks back, a lorry from 'Seconds and Co' turned up, with my £1000 of insulation aboard. I couldn't believe they had sent their own lorry all the way here- how on earth do they stay in business? The driver told me they get the boards for free as the 'first couple of miles' of the production run has too many flaws for Kingspan to bother selling it. Sure enough a small number of the boards have flaws- one has a big void in the middle (you can tap the paper like a drum skin) and a couple of others are distinctly too thin, but otherwise it is just superficial damage, and nothing that cannot be cured with a little expanding foam post installation. My insulation involves rockwool between rafters and studs, and PIR boards on the inside. This helps prevent cold bridging and also works well for vapour control purposes. Today I installed the final piece of overhead rockwool, hurrah. Very glad to see the back of that particular job. The boards are awkward to work with, especially alone, but not as unpleasant as the rockwool. Finally, this Friday I am taking delivery of my larch cladding- a thousand metres of 100x20mm locally grown larch. I designed the building on the premise that I would need to buy standard lengths of 2.4 or 4.8m, and this is what set the ridge height: 4.8m from the lowest point of the building to the barge board. Whilst this worked on paper, I did always think it looked just a bit 'top heavy' and a few extra inches of cladding would have let me slim down the barge boards and give a neater appearance, whilst still avoiding any joins. So imagine my delight when the sawmill phoned and said "Those 16ft boards you ordered, well the planks have actually come in at 4.95m, do you want us to trim them down for you." My answer, of course, was an emphatic No!
    1 point
  5. I think we're pretty relaxed about genuine recommendations from long term contributors like you Vijay.
    1 point
  6. Some pipework porn for you Nick....
    1 point
  7. THe more I look at that word, the more I think it was coined in Cambridge,
    1 point
  8. You might get more expert advice here http://forum.practicalfishkeeping.co.uk Or here http://www.tropicalfishforums.co.uk Good luck with the little fishes!
    1 point
×
×
  • Create New...