Jump to content

3 Comments


Recommended Comments

As some of them are "out" by a few cm, i probably will stick to @Russell griffiths advice and widen the RC beam to 500mm . He suggested that 400mm might be a bit tight to get it all straight and you def. don t want the first course of Blocks laid and realise that it s getting very close to the RC beam corners or even sticking out by a few mm.

500mm would give just that bit of extra space to work the Block plinths wall .

Now with some of the piles out of the centre line by 5-10cm , the 500mm Rc beam will make sure that all of them sit comfortably within the Ring Beam.

At least thats the theory .

We will see - next is tying the cages

I ordered this :

 

30cm-Rebar-Tying-Tool-Semiautomatic-Fast

 

and a few boxes of this:

 

TIEWIRE.jpg

 

so should be 

chocolate-piece-of-cake-cream-bakery_320

 

Link to comment

This is my dumb question of the day. Why do the cages, steelwork etc, have to be tied together with bits of wire, when they are all going to be encased in concrete ? Would plastic cable ties not do the same job ? There you go, told you it was a dumb question.

Link to comment

@Big Jimbo

dont worry, I have dumb questions by the ton, I just spread them out across different forums and friends and family, so it gets picked up less.

 

It s been written elsewhere , but yes, apparently cable ties are just as good as wire.

Options to make cages are (to my knowledge_)

-Wire

-Dot Welding

-Cable ties

 

With these 3 options, wires are probably the cheapest and quickest .

Dont think you can get cable ties cheaper than a few 100m of wire and pliers. And fiddling the cable ties together not going to be quicker than wires either.

 

Many people also buy the pre made cages from Steel Stockholders .

Probably cheaper that way if you ordering rebar anyways and take the time into consideration. Someone needs to tie the bars together (i get my rebar cheaper than any stockholders would be able to- so even with the exta work, still worth it_ )

 

  • Like 1
Link to comment

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...