Jump to content

Building the Timber Frame


jonM

1814 views

Having got all of the groundwork out of the way, it was time to build the timber frame. We were carrying out a stick build, ie: we purchased the i-beams and glulams and the carpenters cut and assembled everything onsite like a huge jigsaw puzzle. We had looked into using a timber frame manufacturer, but we had a good team of carpenters who had experience of stick building a frame, so it didn't seem to make any sense changing a proven formula. 

 

Initial jobs were to get the scaffold up and sole plate down. First i-beams were installed on 3rd Dec and by the end of the day, the main i-beams for both gables were up. 

 

IMG-20181203-WA0003.thumb.jpg.0a817c7c2827c8381fdb52e06387d20c.jpg

 

The work is not helped by the weather which is cold and wet. You need to be pretty resilient to be work outdoors in this weather, nevertheless good progress is made and by 6th Dec the walls are up and parallam beams and ledgers have been fitted. 

 

IMG-20181206-WA0002.thumb.jpg.7fb327eeea80fbf6c941a77d9bd6f333.jpg

 

Big day on Dec 10th as we finally manage to get the electricity switched on. No more generators which should make everyone's life a little easier on site. We now have water and electricity on site and only need to connect to the mains drains at some stage in the future. 

 

First floor joists together with the MVHR ducting that needs to pass through these joists is next to be installed and state of play on Dec 12th is as pictured below.

 

IMG-20181212-WA0003.thumb.jpg.e582c7f62790a08436176a6b2ed25a7c.jpgIMG-20181212-WA0004.thumb.jpg.aac4b984a26531cb987294a79b735377.jpg

 

The first floor is glued to the joists on December 14th. The view from the top of the scaffold isn't bad either. 

IMG-20181214-WA0002.thumb.jpg.1964c36593dc1a74401ecb4968e328d9.jpg

 

There is no way the big heavy glulam ridge beam is going to be manually handled up to the top of the roof, so on the 17th Dec a crane is hired to help out with this operation. It is the only time during the build that a crane is required. Everything else has been manually shifted into place. 

 

IMG-20181217-WA0005.thumb.jpg.eeef9b8dff6c6309425222396780717e.jpg

 

The i-beam roof rafters can now be put into place and on the last day before the teams Christmas break, most of the rafters are in place. IMG-20181221-WA0004.thumb.jpg.91c2f708782f449d66b38a3dc01dffa0.jpg

 

Following a couple of weeks break for Christmas, the rafters are quickly finished off and by January 9th the skeleton of the house is in place. IMG-20190109-WA0000.thumb.jpg.48127368a6099e5c6350f4f97187f9fc.jpg

 

Over the next couple of weeks the house is clad with panelvent on the outside and smartply on the insideIMG-20190122-WA0004.thumb.jpg.8727d8e4443590db42b9b4f90f1dbe3f.jpg 

 

and then wrapped in membrane so that by the 22nd Jan, the house is looking like this. 

IMG-20190122-WA0002.thumb.jpg.cfbccdcb287b03fee2fc1637ccb965cc.jpg

 

 

 

  • Like 7

7 Comments


Recommended Comments

Looks good. Bit closer with your photos be nice to see the detail.

Did stick build work out cost effective?

Link to comment
14 hours ago, Oz07 said:

Looks good. Bit closer with your photos be nice to see the detail.

Did stick build work out cost effective?

Thanks. 

I will include some close-up photos in the next posting. 

Costs for the stick build are working out as per budget, so no surprises so far. I didn't do a detailed costing for a factory made timber frame, so I can't say if it was more cost effective or not. I-Beams and Glulam cost £9500 ex. vat but there is wood, flooring, panelling, membrane and of course labour on top of that. 

Link to comment
12 hours ago, Tennentslager said:

Nice 

it’s like barn raising from and old American movie

That's a nice way of putting it. It's been fascinating watching all the pieces fit together. 

Link to comment
10 hours ago, bissoejosh said:

Nice, is that a Cullen design? Pumped insulation?

Not a Cullen design. It has a simple form so not too complex to build but at the same time the I think the design is pleasing to the eye and  looks elegant. 

Yes - it's pumped cellulose insulation which is going in next week. 

Edited by jonM
Link to comment

Thanks for posting - we're planning a similar style build with the I beams and a Glulam ridge, so interesting to see it go up. Hope the next phase goes well.

Link to comment

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...